Learn More

The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centring, interchangeable bushing for extreme precision in neck sizing. Notes: Bushing fits in Hornady Match-Grade full length and neck sizing die Bushing is self-centring in die body Use of Hornady Match Grade Neck and Full Length Dies and Bushings: Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die). The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die. Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need minimum dimensions. Less sizing results in less working of the brass. Using some loaded or dummy cartridges that fit the rifles chamber without excessive play, measure the diameter of the case neck. Subtract .001" from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it. Bushings work in both the neck and full length Match Grade dies. The bushings are available in .002" increments. The 242, 244, 246 and 248 bushings are for the 223 Remington and 22-250 Remington cartridges. The 260, 262, 264 and 266 bushings are for the 6mm PPC and 243 Winchester cartridges. The 332, 334, 336 and 338 bushings are for the 308 Winchester cartridge. Made In United States of America Learn More

Learn More

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers. Learn More

Learn More

Universal Powder Funnel Set For serious reloaders, the Universal Powder Funnel set is designed for those who load multiple calibres. Once you purchase our Universal Funnel Set, you will never need another funnel. 7 Piece Set Includes: - Small Multi - calibre Powder Funnel - . 243 to . 45 - Patented Adaptor Powder Funnel - 4 adapters and drop tube attach to this funnel - Adapter 1 = . 17 to . 22 - Adapter 2 = . 22 to . 29 - Adapter 3 = . 30 to . 45 - Adapter 4 = . 22 to . 50 Designed for WSM, WSSM and Rem Ultra Mags - 4 Drop Tube = Everyone knows that certain types of powders wont load properly with out a drop tube = . 22 to . 45 - Includes storage case, so you will not loose them before you need them Learn More

Easily Removes Broken Cases Without Field Stripping. Image for reference only Learn More

Easily Removes Broken Cases Without Field Stripping. Image for reference only Learn More

Features a one-piece primer tray and integral moulded primer bushings that eliminate the need for separate bushings. Ergonomic design reduces fatigue. Designed for easy changeovers, shell holders and primer trays can be changed without removing the spring and punch. Includes tray for RCBS shell holders. Learn More

The RCBS Primer Pocket Swager has been redesigned to fit a larger group of cases. The swaging rods are made from stronger, high-tensile steel, more than doubling the strength of the original design. Not for use on progressive presses. Supplied in a plastic case. Code:9481 Learn More