The anvil attaches to the opposite blade of your caliper when utilizing the Hornady Lock-N-Load Headspace Comparator, supplying a large surface area for case heads and bullets to rest, making ogive and headspace measurements easier to obtain. Learn More

The popular Trim Pro case trimmer has been improved with the addition of a spring-loaded universal shell holder. The spring-loaded shell holder securely locks the case in alignment with the cutter. Note: Cases with rim diameters larger than .625-inch must be trimmed on the 90352 High Capacity Trimmer. Features

• Designed for .001-inch accuracy
• Coarse and fine trim length adjustments
• Fine adjustment bushing features .001-inch micrometer markings
• Spring-loaded shell holder accommodates case head diameters from .250-inch to .625-inch rims
• Case fit is from the 5.7mmx28 to .338 Lapua Magnum
• Kit includes pilots: .22, .24, .25, .27, .28, .30, .35, .44 and .45
Learn More

The RCBS Primer Pocket Swager has been redesigned to fit a larger group of cases. The swaging rods are made from stronger, high-tensile steel, more than doubling the strength of the original design. Not for use on progressive presses. Supplied in a plastic case. Code:9481 Learn More

The Universal Hand Priming tool combines the universal shell holder from the APS tool with the prime Learn More

Instant reading. Very easy to use. Hardened stainless steel body for prolonged tool life. Switches from inches to millimeters with the touch of a button. Range of 0-6-inch/0-150mm. Accuracy /- 0.001-inch/0.02mm. Resolution: 0.0005-inch/0.01mm. Large, easy to read numbers, reduces errorno guessing. Adjusts to zero at any position. Measures internal, external, depth and step dimensions. Jaw depth measures 1-1/2-inch outside, 5/8-inch inside. Lock holds slide in position for measuring constants. Battery included. Low battery indicator. Fitted plastic storage case. Code : 87323 Learn More

Learn More

Learn More

Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the removal of too much brass. It includes a Case Pilot Stop. Learn More

Features a one-piece primer tray and integral moulded primer bushings that eliminate the need for separate bushings. Ergonomic design reduces fatigue. Designed for easy changeovers, shell holders and primer trays can be changed without removing the spring and punch. Includes tray for RCBS shell holders. Learn More

The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centring, interchangeable bushing for extreme precision in neck sizing. Notes: Bushing fits in Hornady Match-Grade full length and neck sizing die Bushing is self-centring in die body Use of Hornady Match Grade Neck and Full Length Dies and Bushings: Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die). The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die. Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need minimum dimensions. Less sizing results in less working of the brass. Using some loaded or dummy cartridges that fit the rifles chamber without excessive play, measure the diameter of the case neck. Subtract .001" from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it. Bushings work in both the neck and full length Match Grade dies. The bushings are available in .002" increments. The 242, 244, 246 and 248 bushings are for the 223 Remington and 22-250 Remington cartridges. The 260, 262, 264 and 266 bushings are for the 6mm PPC and 243 Winchester cartridges. The 332, 334, 336 and 338 bushings are for the 308 Winchester cartridge. Made In United States of America Learn More