This manual contains data for over 70 of the most popular centerfire rifle cartridges used today. Learn More

Features a one-piece primer tray and integral moulded primer bushings that eliminate the need for separate bushings. Ergonomic design reduces fatigue. Designed for easy changeovers, shell holders and primer trays can be changed without removing the spring and punch. Includes tray for RCBS shell holders. Learn More

The RCBS Primer Pocket Swager has been redesigned to fit a larger group of cases. The swaging rods are made from stronger, high-tensile steel, more than doubling the strength of the original design. Not for use on progressive presses. Supplied in a plastic case. Code:9481 Learn More

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as its seated. Dies supplied in a plastic case. Code:15301 Learn More

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as its seated. Dies supplied in a plastic case. Code:15401 Learn More

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as its seated. Dies supplied in a plastic case. Code:15501 Learn More

This short handle replaces the long handle that comes standard on the Summit Single-Stage Reloading Press. The RCBS Summit press is a top of the line press that is designed to give solid consistent results every time you use it. One of the best features is that reloaders have the ability to add the short handle to a press. With this handle, reloaders can reduce the length of the handle stroke. This is extremely beneficial when loading shorter cases as unneeded handle length can take its toll after loading several rounds. Fits: RCBSSummit Single Stage Press Function: Short handle for shortening the length of the stroke for reloading short cases Material: Steel shaft with plastic ball on the end for comfort Learn More

Properly clean and lube cases for resizing the simple way with this complete kit. It includes the RCBS Case Lube Pad, a 2-ounce bottle of Case Lube2 and two interchangeable Case Neck Brushes for 22 through 30 caliber. Learn More

This handy cartridge box will hold 100 rounds of .17 rem, .222 and .223 calibre ammunition or other specifications of ammunition of a similar dimension up to the size of .223. If other calibres are to be held the overall length must be under 2.65" or the lid will not close. The box has a sturdy hinged lid and secure locking catch to ensure the ammunition is held securely. Learn More

Bullets are placed in the box in the down position and are protected by four special fingers. These fingers are designed to keep most bullet tips from hitting the bottom of the box, preventing tip damage that can change bullet flight characteristics. There is also extra space provided between rounds to facilitate easy removal. The convenient fold down carrying handle is specifically designed so that belted magnum rounds can be carried rim up or down. Fits: 22BR, 22 Cheetah, 22 PPC, 220 Rus., 220 Swift, 22-250, 224 Wby. Mag., 225 / 243 / 270 / 307 / 308 Win., 244 / 25 Rem., 250 Sav., 28-30 Sevens, 30 / 32 / 35 Rem., 300 Sav., 350 Rem. Mag., 360 Nitro Express 2 1/4, 375 Rimless 2 ", 401 Win. S. L., 5.6x52 Rimmed, 6.5 Creedmoor, 6.5x50 Jap Arisaka, 6.5 x 54mm Mann-Schoen., 6.5x55mm Swedish, 6.8mm Rem. Spl., 6mm BR-DX, 600 Norma BR, 6mm PPC USA, 6mm Rem., 6mm-284 Win., 7.5 Carano, 7.5 x 54 French MAS, 7mmTCU, 7.62x39 Rus., 7.65x53 Mauser, 7mm BR, 7mm-08 Rem. Bullet UP Max. OAL= 2.90" or Bullet DOWN Max. OAL= 3.75" Learn More