Reloading & Ammo
-
Hornady Lock-N-Load Cartridge Headspace Gauge Bushing G .240
Product In stock
G .240" Suitable for: 17 Hornet Generic image for reference only Learn MorePrice: £10.99 -
Hornady Lock-N-Load O.A.L. Gauge - Curved Model
Product In stock
Regulating seating depth and the resulting "jump" to the rifling is widely regarded as fundamental to improved accuracy. A few thousandths of an inch change between the bullet and the rifling can make the difference between average accuracy and real tack-driver performance. Learn MorePrice: £59.99 -
Hornady One Shot Case Sizing Wax
Product In stock
Simply dab on your index finger & thumb, then apply to cartridge case before sizing. A little goes a long way. Features Wax based lube Superior high pressure lubricant Built in tarnish inhibitors Wipes off easily Leaves no sticky residue Far less likely to leave high spots on the case as it self-levels and limits case denting. Learn MorePrice: £11.99 -
Hornady Universal Reloading Block
Product In stock
This double-sided block holds 50 cases and helps streamline powder charging and inspection. Fits 223 Learn MorePrice: £9.98 -
Hornady L-N-L Cartridge Gauge .308 WIN (380716)
Product In stock
Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers. Learn MorePrice: £22.99 -
-
Hornady Match Grade Bushing .285
Product In stock
The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centring, interchangeable bushing for extreme precision in neck sizing. Notes: Bushing fits in Hornady Match-Grade full length and neck sizing die Bushing is self-centring in die body Use of Hornady Match Grade Neck and Full Length Dies and Bushings: Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die). The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die. Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need minimum dimensions. Less sizing results in less working of the brass. Using some loaded or dummy cartridges that fit the rifles chamber without excessive play, measure the diameter of the case neck. Subtract .001" from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it. Bushings work in both the neck and full length Match Grade dies. The bushings are available in .002" increments. The 242, 244, 246 and 248 bushings are for the 223 Remington and 22-250 Remington cartridges. The 260, 262, 264 and 266 bushings are for the 6mm PPC and 243 Winchester cartridges. The 332, 334, 336 and 338 bushings are for the 308 Winchester cartridge. Made In United States of America Learn MorePrice: £36.50